Lower your OPEX with our TR-069 ACS
Single screen config
All the configuration on the CPE can be displayed on a single screen. You don't have to switch multiple application or web GUIs anymore.
Config template will make it easier to shoot an initial config to your CPE/ONU which dramatically improves the installation procedure.
Configuration of VLAN, Q in Q, WiFi SSID, Password, IP address, IGMP are supported.
Multi vendor support
All of the major vendor's ONU are supported, such as Huawei, ZTE, Fiberhome and so many more.
Your engineers no longer have to remember all the configuration procedure on each model. Just connect the ONU and it will download the configuration from the ACS server using TR-069 in less than a minute.
We'll ensure to keep your long term OPEX as low as possible.
Fully customizable
With our integrated GIS system, fiber maintenance never gets easier.
You can show all of your CPEs as well as OLTs on the single map.
When the fiber is cut for some reason, you'll get the notification and able to check the exact place where the fiber is damaged. Fiber length up to 20km (EPON/GPON) are supported.
Best in-class Stability and Scalability
Cloud Based
Multi Device support
Minimized latency
Continuous backup
Cloud based system ensures you the uptime.
You no longer have to install an on-premise server and maintain it.
Our solution is deployed on cloud so you will not suffer the downtime due to the server malfunctioning.
Our system is web-based, which means you can use all kinds of operating systems such as Windows, Mac, Android, iOS.
All the config change is recorded on the cloud side, which means you don't have to transfer data from one device to another anymore.
Have you suffered a latency issue due to the higher RTT (Round trip time)?
You can select a nearest Equinix Internet Exchange to deploy your system to minimize the latency.
Currently, we're supporting Amsterdam, New York, Tokyo, Sydney, Sao paulo data centers.
You will always have an hourly and daily backups so you can easily revert the system once you encounter the trouble.
Our cloud server will keep up to 99 hourly backups and 99 daily backups, but you can download them and keep them locally in order to keep the backups forever.
Contact
Ease your NOC operation
No experience on ISP operation? No problem, we're here for you
Not a professinoal?
No complication
DIY the FIber Optic
Future proof
Deploying a regional Internet network or Internet for residents?
Are you a network administrator of municipality or residential complex and haven't deployed any Fiber optic network?
Don't worry, we will guide and assist you from the beginning.
Give us call and we'll calculate the brief time frame and cost in order to achive your fiber network.
Have you never touched fiber optic?
Selecting a fiber optic cable is quite complicated.
We will assist you to choose the best fiber optic cable (Round drop, FTTH drop, Figure-8, Direct buried) as well as the fiber optic core type (G652.D, G657.A1, G657.A2, G657.B3, G655, G656, G657) to minimize your cost and maximize the perfomance as well as to ensure the future expandability.
Connecting two fiber optic cables normally needs a special technique called "splicing" with a special tool called "Fiber splicer" which requires a special skill.
However, depends on your request, we could also offer the way not to use the splicing, but using the special mechanical connectors.
Everything depends on the density requirement, feel free to contact us for more details.
Does your area have no high-speed internet?
Are you interested in deploying a very low cost internet network to your building or to your city?
Comparing ADSL, WiMAX, Cable, FTTX, FTTX is the clear winner among all for speed, durability, future expandability.
We offer the best solution to keep your CAPEX and OPEX as low as possible.
2024 All Rights Reserved, Yashimatechnology
YASHIMATECHNOLOGY
KVK: 71227113
VAT: NL002486316B62
Princess Margrietplantsoen 33
2595AM, S-Gravenhage
TEL: +31-685-180-023
Email: info @ yashimatechnology.com